You’re in luck! I have the perfect board ssr products for you. I want to find out what is most important and useful when it comes down to choosing a newboard ssr product, so please answer this question: Who am I trying to get these things from? The best way would be if they were people close by (family) as well or just friends; then again maybe not everyone likes being surrounded by their loved ones all day long…

Solid State Relay Module, 1 Channel DC 5V/12V 2A SSR Module Board with Fuse Low Level Trigger(5V)

 

  • ABOUT DETAILS – The rated current of 1 channel SSR module is 2A, and the voltage is DC 5V/12V(optional).
  • LOW LEVEL TRIGGER – In industrial control, called PNP trigger, negetive trigger, when the voltage between the trigger terminal and the negative pole of the power supply is 0V or close to 0V.
  • CH TERMINAL – The CH terminal is the trigger terminal of the module. When there is a trigger signal, the output switches (A, B) of the solid state relay will close. The load will be conductive.
  • WITH FUSE – With fuse to ensure the safe use of this module. High sensitivity.
  • STABLE PERFORMANCE – Stable performance of electronic components, so that your equipment can work stably.

Solid State Relay SSR Board for Arduino Uno Yun Leonardo Zero

 

  • Supports Arduino Uno / Yun / Leonardo / Zero, the module gives your Arduino project the ability to control AC 115V/230V devices, easily makes normal home appliances become intelligent.
  • 4 Channel solid state relays switch output. Rated output voltage: AC 100 ~ 240V(50/60Hz). Applicable load current: 0.1 ~ 2Amp(each channel). Solid state relays are different from traditional electromagnetic relays in that their switching life is much longer than that of electromagnetic relays. Note: the item can’t support DC load.
  • One LED for power and four LEDs for relays status indicating. Relay control pin jumpers, allows to control the relays by custom pins other than the default pins. With a Reset button for Arduino.
  • Output terminal: Pluggable screw terminal blocks, top wire connect, pitch 5.08mm/0.2″, strip length 7mm, screws – M2.5, steel, Cr3+ Zn plated. pin header and cage – brass. Wire range 28AWG ~ 12AWG / 2.5mm square.
  • Package included: 1x SSR Board (NOTE: the item not include Arduino module).

DollaTek Low Level Trigger 4-Channel 5v Solid State Relay Module Board SSR

 

  • Led indicator for each relay.
  • Input control signal voltage: 0V – 0.5V Low stage (SSR off), 0.5V – 2.5V (unknown state), 2.5V – 20V High state (SSR active); SSR output (each channel);
  • Load voltage range: 75 to 264 VAC (50/60 Hz); Load current: 0.1 to 2 AMP Standard interface that can be directly controlled by the microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

you want to buy a product, it pays to know who you’re getting it from. We only work with reputable sellers that are committed to excellent customer service and quality items. You can feel confident when buying our chosen products because we’ve done all the research for you!

Looking to buy products from branded sellers? You want the best products and you want to be sure that what you buy is from a reputable seller. You need to know whether or not this product is going to work for your needs, but most importantly, you want to feel confident about who you are buying from.

 

DollaTek 5V 8-Channel Solid State Relay High Level Trigger SSR Module Board for Arduino ARM DSP PIC with Resistive Fuse

 

  • 5V solid state relay 240V 2A, output with resistive 2A fuse 240V.
  • Dimensions: 106 x 56 x 25 (L x W x H)
  • The input power supply: DC 5V (160MA)
  • LED indicator for each relay

SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC

 

  • Has been assembled, and electrical test passed.
  • Led indicator for each relay.
  • FR-4 Fiber glass PCB (Double Layer); Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
  • Input control signal voltage: 0V – 0.5V Low stage (SSR is OFF), 0.5V – 2.5V (unknown state), 2.5V – 20V High state (SSR is ON); SSR Output (each channel); Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Electronics-Salon DC5V 1 Channel DC-AC 2Amp G3MB-202P Solid State Relay SSR Module Board.

 

  • Input control voltage DC 5V, Current 20mA. LED indicator for SSR action.
  • Rated output voltage: AC 100 ~ 240V(50/60Hz). Applicable load current: 0.1 ~ 2Amp(each channel).
  • Pin Jumper option for control mode configurations in common positive or common negative. SSR output series 3Amp fuse to protect your equipment.
  • G3MB-202P 5VDC SSR, Isolation: Phototriac. Zero cross: Yes. Rated output load: 2A at 100 to 240VAC (50/60Hz). Load type: General purpose.
  • High quality terminal blocks. Wire range: 24 ~ 12 AWG. Strip length: 7mm. Screws – M2.5 steel, Cr3+ Zn plated. Pin header and Cage – Brass.

Choose board ssr products with the best price

The best price for board ssr product is when you buy it from one of the major retailers. It will depend entirely upon which retailer has its lowest or where there is no competition between sellers so that they can charge whatever rate they like without having any opposition from other retailers who offer their goods elsewhere.

With the help of online shopping, you can now purchase board ssr products from all over the world in a quick and easy manner.

Our blog is chock full of items with all these qualities in mind. You can go ahead and compare prices on anything from here.

You have been looking for the best price to buy a product. The best way to find this is by using google shopping. This will allow you to compare prices from hundreds of retailers.

We have compiled a list of tips that will help you make the right decision about where to shop next time you need something.

SMAKN high Level Trigger 8-Channel 5v Solid State Relay Module Board SSR

 

  • Has been assembled, and electrical test passed.
  • Led indicator for each relay.
  • Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
  • Input control signal voltage: 0V – 0.5V Low stage (SSR is OFF), 0.5V – 2.5V (unknown state), 2.5V – 20V High state (SSR is ON); SSR Output (each channel);
  • Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

Finding the right board ssr to meet your needs can be a daunting task. With so many board ssr on the market, it can be hard to know where to start. This blog post will help you find the best board ssr for your needs. We’ll provide tips on how to find the right board ssr and advice on what to look for when shopping for goods.

Buying quality board ssr feels like an investment in yourself. In today’s blog post, we’re going to take a closer look at some of the best board ssr on the market and analyze what makes them so great. Stay tuned for some tips on how to find the perfect board ssr for you!

 

DollaTek 1-Channel 5V SSR Low Level Trigger Solid State Relay Module Board

 

  • 5V low level activation of solid state relay, with resistive fuse output (240V 2A)
  • It is a 1-channel solid state relay board, which can be controlled by a wide range of microcontrollers such as AVR, PIC, ARM, PLC, etc.
  • With blue KF301terminal, more convenient for control line
  • Standard interface can be connected with microcontrollers
  • Solid state relay module

You can’t go wrong with professionally branded board ssr products.

You can’t go wrong with professionally branded products.

A branded product is one where the name of its manufacturer appears on it. Get all the latest products at your fingertips with a wide variety of options from trusted brands.

With our collection, there’s something for everyone!

Who doesn’t love a good deal? I know that the answer is most of us, but if you’re in need of some high-quality products with your hard-earned cash then we have just what’s right.

Check out our selection and let us help guide you on where to start!!!

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

 

  • Solid State Relay Module Board has been assembled, and electrical test passed
  • Led indicator for each relay
  • Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
  • Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V – 0.5V Low stage (SSR is OFF), 0.5V – 2.5V (unknown state), 2.5V – 20V High state (SSR is ON); SSR Output (each channel);
  • Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)

There is nothing like the satisfaction of finding the perfect board ssr. It can be something you use every day or something that’s just perfect for the occasion. whatever it is, when you find it, you know it. Here are some tips on how to find the perfect board ssr for you.

Finding the perfect board ssr can be a daunting task. With so many options to choose from, how do you know which one is right for you? These tips will help make the process easier and less overwhelming.

When you are looking for the perfect board ssr, it can be tough to know where to start. With all of the different board ssrs on the market, how do you know which one is right for you? Here are some tips on how to find the perfect board ssr for you.

Electronics-Salon DIN Rail Mount DC5V 8 Channels DC-AC 2Amp G3MB-202P Solid State Relay SSR Module Board.

 

  • Input control voltage DC 5V, Current 20mA for each channel. LED indicator for SSR each channel action.
  • Rated output voltage: AC 100 ~ 240V(50/60Hz). Applicable load current: 0.1 ~ 2Amp(each channel).
  • Pin Jumper option for control mode configurations in common positive or common negative. SSR output series 3Amp fuse to protect your equipment. G3MB-202P 5VDC SSR, Isolation: Phototriac. Zero cross: Yes. Rated output load: 2A at 100 to 240VAC (50/60Hz). Load type: General purpose.
  • DINKLE Fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use.
  • High quality terminal blocks. Wire range: 24 ~ 12 AWG. Strip length: 7mm. Screws – M2.5 steel, Cr3+ Zn plated. Pin header and Cage – Brass.

We read lots of reviews for board ssr products listed in the post.

We encourage you to share your opinions of board ssr products, both favorable and unfavorable.

1/3 of buyers said review sites played an important role in their purchasing decision-making process.

If you’re new to customer reviews or not sure where to find them, let’s brush up on some basics and highlight why they’re relevant for you.

Customer reviews are a good opportunity to help you understand board ssr products.  

We are always at your disposal for further advice.